GESKE - MicroCurrent Skin Scrubber & Blackhead Remover - 9 In 1 - Starlight

What is the device: It is an electronic ultrasonic facial cleansing spatula that combines microcurrent and 8 other technologies for deep cleansing, blackhead removal and anti-aging. It has a design like a flat stainless steel spatula, which, vibrating at a high frequency, helps exfoliate and extract sebum from the pores (“skin scrubber” function). In addition, it incorporates iontophoresis technology: ION+ and ION- functions that use positive/negative ions for cleansing and nourishment respectively. It also features MicroCurrent Face-Lift – emission of mild low-intensity electric currents that stimulate facial muscles (like “gymnastics” for the face) and red LED light. Overall, the 9in1 Skin Scrubber promises clean, radiant skin without imperfections and at the same time lifting/tightening. The Starlight shade (probably gray with iridescence) is just the color. The device is rechargeable (approximately 700mAh battery, USB charging) and IPX5 waterproof for safe use in wet environments.

Functions & Benefits: The MicroCurrent Skin Scrubber & Blackhead Remover combines multiple cleansing and anti-aging functions in one device. In detail:

• Ultra Hygienic Deep Cleansing (ION+): In this mode, the spatula emits positive ions which “magnetically” attract negatively charged dirt and sebum particles from the pores. At the same time, it vibrates at a high frequency (ultrasound), exfoliating dead surface cells – something GESKE calls Dry & Dead Cell Removal Technology. . The result is a deep cleansing that frees pores from blackheads and leaves the skin smooth and soft, without damaging it. Using the device for 3-5 minutes a day, dead cells, oil and dirt are removed in depth. Blackheads and whiteheads are noticeably reduced with regular use, making it ideal for those who have a tendency to sebum or clogged pores.
• Deep Nurturing (ION-): In this setting, negative ions are emitted and is usually combined with the spatula surface being heated (“Pore-Opening Deep Warming” function). What does this do? It helps care products (serums, ampoules) penetrate deeper into the skin. After cleansing, apply e.g. a vitamin serum and put the device in ION- mode: the warm spatula and negative ions push the nutrients deeper, nourishing the skin from the inside. This maximizes the effectiveness of your care – the skin absorbs more active ingredients, so it becomes brighter and healthier.
• MicroCurrent Face-Lift: The device has two small conductive surfaces (possibly on the sides or on the spatula) that emit low-intensity microcurrents. These currents penetrate the skin superficially and slightly contract the facial muscles – it’s like a “mild exercise” for the muscles, helping to tighten and lift the features. GESKE reports that over 65 facial & neck muscles are stimulated, improving the contour of the face (e.g. the oval becomes more sculpted), slightly lifting areas such as the cheekbones and reducing the appearance of fine lines through muscle tone. The result is a more “rested” and youthful appearance. At the same time, microcurrents are believed to stimulate the production of collagen and elastin in the long term. (Note: For the microcurrent function, it is necessary to apply a conductive gel to the skin – e.g. GESKE Hydrating MicroCurrent Gel – so that the currents are properly transferred and the skin is not dried out).
• Anti-Ageing Red Light: Like other GESKE devices, it includes red LED light that helps keep the skin healthy and free of imperfections. Red light (approximately 630-650nm wavelength) reduces micro-inflammation, stimulates circulation and pushes cells to produce collagen. This contributes to the healing of the skin after deep cleansing (soothing any irritation from sebum extraction) and at the same time reduces fine lines and stimulates renewal, making the skin more elastic. In combination with microcurrents, red light ensures that the skin is not only cleansed, but also tightened/rejuvenated.
• Sonic Vibration & Massage: The spatula itself vibrates (SmartSonic Pulsation), providing a gentle high-frequency massage. This not only enhances cleansing, but also offers a “youthful glow” massage (Youthful Glow Massage) – it increases microcirculation, bringing more oxygen to the cells, which gives a natural glow and healthy color to the face. The massage also relieves tension in the muscles (e.g. around the jaw, forehead), reducing swelling and giving a feeling of relaxation. The increased circulation also helps to eliminate toxins, contributing to clearer skin.

Who it's for: This device is ideal for those who want a complete facial cleansing and toning "tool". Specifically:

• People with oily skin, blackheads or a tendency towards blemishes: The ultrasonic and ionic skin scrubber will help them deeply cleanse their skin at home, reducing blemishes and dullness. It's like doing a mini facial cleansing on their own every week.
• People with dull, tired skin that needs tightening: The microcurrent and red light function is mainly aimed at 30-40+ who are starting to see minor sagging, wrinkles or loss of tone. With daily 5-minute use, they can see contour lifting, improvement in “crow’s feet” and expression lines Microcurrents also stimulate collagen production, so people concerned about anti-aging will appreciate it.
• All skin types: Because the modes can be customized (e.g., you can use only the scrubber if you have youthful, acne-prone skin, or only microcurrent if you have dry, mature skin), the device is versatile. All types (dry, combination, oily) will benefit from deep cleansing and better product absorption. Just a word of caution: on very sensitive or rosacea-prone skin, the scrubber mode may be intense – it should be used on low intensity and no more than once a week, or skipped if it causes irritation. For most people, however, it is safe and effective.

It is a consumer home device, but many of its technologies (ultrasound, iontophoresis, microcurrent) are inspired by professional aesthetic devices. This makes it a great option for those who want to save money on in-salon cleanings/treatments and do them themselves at home. Also, if someone has difficulty with conventional extraction tools (e.g. blackhead tweezers), this tool makes the process easier and less painful.

How to use (Steps): The device has multiple functions/buttons. Usually there is a function button that with each press changes the mode (e.g. Cleansing / Lifting / Moisturizing etc.) with LED indicators. Below is an example of use for deep cleansing and microcurrent in one session:

1. Skin preparation: Wash your face with a mild cleanser and keep it slightly damp. It is important that the skin is damp or with some product during the scrubber mode so that the spatula glides and the ultrasounds are transmitted properly (and not abrades dry skin). You can apply a toner or steam the face a little to open the pores.
2. Exfoliate Mode (ION+ Cleansing): Press the power button until the “Exfoliation” or “Cleansing” indicator lights up (usually an LED with “ION+”). This means the device is in deep cleansing mode with positive ions. Hold the device so that the metal spatula has its concave side facing the skin and the LED lights are facing away from you (usually this position activates the exfoliation mode).
3. Scrubber motion: With a steady hand, place the tip of the spatula on your skin at a ~30° angle (almost parallel to the skin). Slowly glide it over your face from the center outwards: start at the chin and move up along the chin. Then, on the sides of the nose towards the cheeks, and continue area by area. You will feel a slight vibration and may see fine jets of water vapor/liquid “shooting” from the spatula – this is the cavitation effect, which means that impurities are being removed. Pay attention to the nose and chin where sebum accumulates. You can wipe the tip of the spatula with a cotton swab from time to time to clean the material it releases. Continue for ~3-5 minutes in total. (Note: If the skin dries out during the process, spray a little water or toner to keep it moist.) You will notice that after the procedure, the skin is very smooth to the touch and any dullness has been noticeably reduced.
4. Nutrition Mode (ION-): Now wipe off any moisture from your face and apply a serum or serum of your choice (e.g. hyaluronic, vitamin C, etc.). Press the power button to change the mode to “Moisturizing” or “ION-” (negative ions). Now hold the device with the curved side of the spatula towards the skin (usually the opposite from before). The device may heat up slightly in this mode. Move the spatula all over the face again, this time more evenly and slowly, helping the serum to penetrate. No need to press – just facilitate the glide and let the ions do the work. After ~2 minutes, your serum will be almost completely absorbed (much better than if you applied it with your fingers). The skin is now clean and “full” of nutrients.
5. Microcurrent Lift Mode: Now, if you want, you can continue with the lifting. Make sure your face still has moisture/conductive gel on it (if the serum has dried, apply a little of the special Conductive Gel or a thick layer of aloe vera gel). Press the button so that the “Lift” or “Microcurrent” indicator lights up. Usually in this mode, the machine activates the red light at the same time. You may feel a very slight tingling or nothing (microcurrents are sub-sensible, they do not hurt). Place the spatula on the sides of the face with the flat side and slowly slide it upwards: e.g. from the lower part of the face up to the cheeks, from the eyebrow to the forehead, etc. Hold each pass for a few seconds. Since the goal here is muscle stimulation, you can focus under the cheekbones (for lifting), on the forehead (for eyebrow lifting), on the jawline. Total duration ~5 minutes. During the procedure, microcurrents build collagen and “work out” the muscles, while the red LED light works against wrinkles. After this procedure, the face may have a slight rosy tint (due to increased circulation), and feel tighter.
6. Completion & Cleaning: Turn off the device. Rinse your face with cool water (if you have any gel residue) and continue with the rest of your routine (e.g. cream). Clean the metal spatula with mild soap and water, wipe it dry. Also, clean the body of the device with a cloth. Make sure to dry it thoroughly before storing it.

Tips: For blackheads, you can take a hot shower or steam your face for a few minutes before cleansing – it will soften the sebum and the scrubber will remove them more easily. After the treatment, it is a good idea to apply an astringent toner or a clay mask to tighten the pores that were cleaned. Also, always use enough liquid/gel when doing microcurrent, otherwise you will feel pinching and the device will not slide properly. GESKE's gel is specially made with moisturizing ingredients, but an inexpensive aloe vera gel also works (as a user mentioned on a forum).

Reviews: Users who have tried the device notice multiple benefits. Many report that “my pores have shrunk and my face is not as shiny in the oily zone,” thanks to regular scrubbing with the scrubber. Others praise the lift: “my face feels tighter – especially in the jawline.” In a 4-week trial, it is reported that 90% of users saw a reduction in sebum and a better appearance of pores, while ~85% said their face looked more toned (tightened) and wrinkles were less visible. Experts comment that the combination of technologies is “extremely complete”: It cleanses deeply like a hydrodermabrasion treatment and tightens almost like a microcurrent facial – all in one device. It is no coincidence that this product was designated “Best Seller” in several markets. In conclusion, the GESKE MicroCurrent Skin Scrubber 9in1 is considered very effective in improving skin texture and clarity, making it a must-have for anyone who wants clean, radiant and firm skin without blackheads and wrinkles. (Note: Remember that this is not a medical device – this is for cosmetic/aesthetic use.)